Specifications - Sanyo VHR-VK210A Service Manual

General
Power
Power consumption
Video Head system
Tape speed
Tape format
Maximum recording time
Rewind time
Dimensions (W X H X D)
Weight
Operating temperature
Operating humidity
Timer
Video
Input level
Output level
Signal to noise ratio
RF Modulator
Audio
Input level
Output level
Track
Frequency response
Signal to noise ratio
Dynamic range
• Design and specifications are subject to change without notice.
:VHR-VK810A Model only

SPECIFICATIONS

: 110~240V, 50/60Hz
: Approx. 18 watts(Energy Saving mode : 3 watts)
(VHR-VK810A)
Approx, 16watts(Energy Saving mode : 3 watts)
(VHR-VK210A)
: Double azimuth 4 heads, helical scanning system
(VHR-VK810A)
Rotary 2 heads, helical scanning system
(VHR-VK210A)
: 23.39 mm/sec (SP mode)11.69 mm/sec(LP mode)
: Tape width 1/2" (12.7 mm high density VHS tape)
: 4 hours in SP mode/8 hours in LP mode (with E-240 tape)
: Approx. 65 (+/- 10) sec. (with E-180 tape)
: 14.2" X 3.6" X 11.4" (360 x 94 x 270 mm)
: 3.4 kg
: 5°C-35°C
: Less than 80%
: 24 hours display type
: VIDEO IN (RCA type)
1.0 Vp-p, 75 ohm, unbalanced
: VIDEO OUT (RCA type)
1.0 Vp-p, 75 ohm, unbalanced
: More than 43 dBm
: UHF 28~68(Adjustable)
: AUDIO IN (RCA type)
-6.0 dBm, more than 47kΩ
: AUDIO OUT (RCA type)
-6.0 dBm, less than 1kΩ
Mono track & Hi-Fi track
: Normal : 100 Hz-10 kHz(-6/+3 dB)
: Hi-Fi : 20 Hz-20kHz (3-/+3 dB)
: Normal : More than 43 dB (at SP mode)
: Hi-Fi : More than 70 dB (at SP mode)
: Hi-Fi : More than 80 dB (at SP mode)
1-6