Select Picture Mode for Normal Viewing
After you use the HDTV Setup Wizard to select all the HDTV picture formats
you want to use, you need to choose a General Settings picture mode for
normal viewing. If you do not have your HDTV connected to the HDMI connector
on the back of the 8300HD DVR, then Pass-Through mode is recommended for
normal viewing. Pass-Through mode allows non-HD channels to be displayed
using their native picture formats, which can improve picture quality on non-HD
channels.
To select Pass-Through mode for normal viewing,
follow these steps.
1. Press Settings
Settings menu appears.
2. Press Move Up
highlight Set: Picture Format.
3. Press Move Right
format setting.
4. Press Move Up
5. Press Accept
A
displays AUTO, plus the scan rate you are viewing (for example, 1080i).
6. Press Exit
to return to normal viewing.
Note: When the HDMI connector is connected to the HDTV, the General
Settings - Set: Picture Format screen displays the AutoDVI/HDMI option
instead of the Pass-Through option.
Important: Do not connect the HDMI (DVI) output to a HDTV that does not
support High-Definition Copy Protection (HDCP). If you connect the HDMI (DVI)
output cable to a HDTV that does not support HDCP, you will not be able to see
any video output. A message will be displayed instructing you to disconnect the
HDMI connection and watch video output through the PrPbY component
connectors.
6
twice. The General
or Move Down
to highlight the picture
to select Pass-Through.
to use this option for the 8300HD. The DVR front panel
to