HP Spectre Pro x360 G2 Maintenance And Service Manual page 44

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
a. Remove the battery (see
b. Remove the fan (see
c. Remove the system board (see
Remove the keyboard:
1. Remove the 55 Phillips PM1.1×1.5 screws that secure the keyboard to the top cover from the locations
in the following illustration.
2. Remove the keyboard shields (1).
36 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 23).
Fan on page 27).
System board on page
22), and then remove the following components:
31).