OPEN COIL COOKTOP COMPONENTS
Use the following procedure to access the cooktop components:
1.
Unplug the elements and then remove the drip pans.
2.
Remove the four screws from the cooktop inside the element openings. The cooktop can now
be raised. Refer to the following page to service the individual components.
REASSEMBLY NOTE: When you mount the cooktop to the range, loosely install the four mounting
screws, then push the cooktop forward so that there is no gap or bow between the front edge of
the cooktop and the trim extension, and then tighten the four screws securely.
Mounting Screws
Cooktop
- 12 -
No Gap or Bow Along
This Edge
Trim
Extension