Table of Contents
Advertisement
2
4
4
3.2 Machine start-up
Before proceeding to use the oven for cooking food, it is necessary to adequately preheat the
cooking compartment.
Step
1
Insert the plug in the socket located on the shunt box
Make sure that the magnetothermic switch and the differential switch are both
2
on.
3
Turn the power socket's disconnection switch to I/ON.
Turn the oven on and act on temperature commands of the cooking chamber at
a temperature of about 200° C and maintain this temperature for about an
hour.
4
While the oven is being preheated, it will emit steam with an unpleasant smell.
This is due to the surface oxidation of the annealed heating elements.
When the first cycle is completed, the metal will be stabilized and will no longer
produce any unpleasant odor. While personally supervising the oven, open the
5
front door and keep it open for several minutes so as to change the air in the
oven more quickly, then close the door.
After the preheating phase has been performed, all the metal and refractory
components in the cooking compartment will have reached the stabilization
temperature and it will then be possible to normally use the oven.
6
For subsequent use of the oven it will not be necessary to perform the above
preheating cycle again.
Electric Pizza Ovens – Mod. "B"
1
SECTION B – Cooking timer
3
1. display for the cooking timer;
2. push-button for increasing the cooking time;
3. push-button for decreasing the cooking time;
4. push-button to start and clear the timer;
SECTION C - Switch on button
1. Switch on/off button of the oven.
Action
17
Ed.1/2012 Rev.0 -
ENG
Advertisement
Table of Contents
