Preliminary Installation Requirements - cam B1 Installation Operating And Maintenance Istructions

Make the connection following the provided technical manners, respecting both the
cyclic sequence of phases of connection, and the color coding of conductors.
ENG
Protection against overcurrent and differential protection must be installed
upstream of the connected equipment by the user.

2.4 Preliminary installation requirements

Install the machine only after you have checked that:
All the components and materials necessary to perform the installation must: be done in full
compliance with the laws in force and abide by the dictates of the low voltage directive and
the electromagnetic compatibility directive in force.
14
Ed.1/2012 Rev.0
-
the voltage indicated on the plate is the voltage the machine will be supplied
with;
the voltage and absorbed power characteristics of each machine model (Sec.
1.4) are suitable for the available voltage and power;
the distribution system has an effective earthing system and safety switch.
Keep in perfect condition and adequately protect against any
damage the cable, the plug connection of the oven and all protective
equipment and isolation of the power distribution box of the oven
itself.