Table of Contents
Advertisement
2.4.1 Technical information reserved to the qualified installer
The following informations are aimed, only, at qualified technical
staff.
The specialist installer near the point of installation of the oven, must:
Place a length of power cable near the unit so as to permit the installed power cable to reach
the power socket (do not use extension cables to make this connection);
Install a suitable interlocked socket of industrial type;
Install a disconnection switch;
Install a thermal disconnector and differential switch whose sensitivity is suitable to
the current leakage from the heating elements.
Once operating checks and inspections are finished, the installer will have to issue
the Declaration of Conformity in compliance with the provisions of
Electric Pizza Ovens – Mod. "B"
Ed.1/2012 Rev.0 -
ENG
Act 46/90
15
Advertisement
Table of Contents
