Canon VB-S30D Operating Manual page 99

Click [Detailed Settings] and select the [Show in
2
viewers] checkbox.
Drag to move or resize the preset preview frame
3
(yellow) shown on the panorama screen to set the
preset.
If you click on the panorama screen, the preview
frame will move to center on the clicked point.
Click [Preview settings].
4
The settings are reflected in the video display area.
If you previewed incorrect settings, etc., and want to
restore the settings registered in the camera, click
[Restore settings].
Click [Save settings].
5
Using the Digital PTZ Function to Set Presets
Use the Digital PTZ function to set part of the area that can
be captured by the camera as a preset.
Select the preset you want to set from the [Home
1
Position/Preset] selection box, and then fill in the
[Preset Name] field.
Be sure to enter the preset name.
Select the [Show in viewers] checkbox.
2
Change the position or size of the preset preview
3
frame (yellow) displayed on [Full Image] to set the
preset position.
If you click on the full video, the preview frame will
move to center on the clicked position.
Click [Preview settings].
4
The settings are reflected in the video display area.
If you previewed incorrect settings, etc., and want to
restore the settings registered in the camera, click
[Restore settings].
Click [Save settings].
5
Note
Digital PTZ is a function for transmitting only the specified part of
a camera video. Therefore, this function reduces the load on the
network.
Preset Setting Tool
4
99