Canon VB-S30D Operating Manual page 110

Setting Event Operations ([Event] tab)
Set operations to be performed upon detection of
changes in a subject.
[Event] tab
(1) Specify the operation timing. (Multiple checkboxes can
be selected.)
[ON Event Operation] checkbox
When selected, the operations set in (2) [E-mail
Notification] and [Video Record] are performed the
moment detected mode is triggered to ON.
[OFF Event Operation] checkbox
When selected, the operations set in (2) [E-mail
Notification] and [Video Record] are performed the
moment detected mode is triggered to OFF.
[Detected mode Operation] checkbox
When selected, the operations set in (2) [E-mail
Notification] and [Video Record] are performed for as
long as detected mode is active.
(2) Specify the event operation. (Multiple checkboxes can
be selected.)
[E-mail Notification] checkbox
When selected, e-mail notification is performed at the
timing set in (1). [E-mail Notification] must be set in
advance under [Upload] in the Setting page (p. 57).
[Video Record] checkbox
When selected, video record is performed at the
timing set in (1). [Video Record Action] must be set in
advance under [Event] in the Setting page (p. 60).
(3) Operation of External Device Output
[External Device Output for ON Event] checkbox
Select this checkbox for enabling external device
output at an ON event and select operation (active or
inactive).
[External Device Output for OFF Event] checkbox
Select this checkbox for enabling external device
output at an OFF event and select operation (active or
inactive).
110
(1)
(2)
(3)
Setting Detection Areas
Set detection areas in the video display area.
Setting a [Rectangular] detection area
A rectangle is shown in the video display area. Move or
resize that rectangle to set a detection area.
Setting a [Polygonal] detection area
Specify polygonal areas with a maximum of 32 angles.
Click in the video display area to form the polygon point
by point. Click on a previously set point to complete the
polygon and set the enclosed area as the detection area.
The set area can also be moved by dragging it.
Setting a detection area using [Quick setting]
[Quick setting] can be configured for [Removed Object
Detection] only.
Temporarily remove the object whose removal you
1
want to detect from the video display area.
Click [Restart intelligent function].
2
The background video is created.
Replace the object whose removal you want to detect
3
in its original position.
Click [Quick setting].
4
An outline for the detection object is drawn using a
polygon with up to 32 points.
If there are multiple detection objects, the area is
drawn around the largest object.