Canon VB-S30D Operating Manual page 160

V420 Could not start intelligent service [crit]
Description intelligent initialization error [%1] [%2] .
(V420)
%1 Error number
%2 Cause of error
Meaning Failed to initialize intelligent service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
V421 Intelligent service error [crit]
Description intelligent working error [%1] [%2] . (V421)
%1 Error number
%2 Cause of error
Meaning An error that does not permit recovery
occurred while intelligent service was
running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Application (Memory Card) Messages
M001 Starting and stopping of memory card control
module [info]
Description %1 sdctrl (M001)
%1 Starting or stopping
Meaning The memory card control module (sdctrl)
has started or stopped.
M203 Not enough space on memory card [warning]
Description There is not available space (M203)
Meaning Insufficient memory card capacity.
M204 Invalid file removed [warning]
Description Invalid file %1 was removed. (M204)
%1 Name of removed file
Meaning An invalid file was removed.
M207 Memory card removed before unmounting
[warning]
Description Memory card was pulled before unmount.
(M207)
Meaning The memory card was removed while still
mounted.
160
M208 Video file limit [warning]
Description Video file count of %1 reached upper limit.
(M208)
%1 Video type ([Upload], [Recording-Mode
Stream], [Manual], [Timer], [Event])
Meaning The upper limit for the number of video files
that can be saved for that video type has
been reached.
Logs will be output for [Timer] and [Event]
only when [Overwrite videos] is set to
[Disable].
M301 Memory card control module error [err]
Description %1 process failure (M301)
%1 mount or unmount
Meaning Mount or unmount process failed.
Application (Camera) Messages
C001 Starting and stopping of camera control module
[info]
Description %1 camerad (C001)
%1 starting | stopping
Meaning The camera control module started/
stopped.
C002 Camera application started [info]
Description starting cameraappl (C002)
Meaning The camera application started.
C201 Day/Night mode switching warning [warning]
Description Can't switch Day/Night mode, because
current mode is Auto. (C201)
Meaning Could not switch day/night mode.
Countermeasure Set Day/Night mode manually.
C211 Camera control command overflow [warning]
Description command queue overflowed (C211)
Meaning The camera control command queue
overflowed, and some commands were
discarded.
Countermeasure Allow a longer interval (200 ms) for sending
the camera control command.