Autonet; Bonjour (Rendezvous) - Ricoh Pro C550ex Network Manual

Hide thumbs Also See for Pro C550ex:

Table of Contents

• For IPv4 and IPv6, you can select an ID number between 1 and 5.

• IPv6 can register and select the range and the mask for each access ranges.

• IPv6 mask ranges between 1 - 128 can be selected.

• Up to five access ranges can be specified. The entry is invalid if the target number is omitted.

• You cannot send print jobs, or access Web Image Monitor and diprint from a restricted IP address.

autonet

Use the "autonet" command to configure AutoNet parameters.

View settings

The following command displays the current AutoNet settings:

msh> autonet

Configuration

You can configure AutoNet settings.

msh> autonet {on|off}

• {on} means "active" and {off} means "inactive".

Current interface priority configuration display

msh> autonet priority

Use the "bonjour (rendezvous)" command to display bonjour (rendezvous)-related settings.

View settings

Bonjour settings are displayed.

msh> bonjour

Bonjour service name setting

You can specify the Bonjour service name.

msh> bonjour cname "computer name"

• The computer name can be entered using up to 63 alphanumeric characters.

• If you do not specify a character string, the current setting is displayed.

Bonjour Installation location information setting

You can enter information about the location where the machine is installed.

msh> bonjour location "location"

• Information about location can be entered using up to 32 alphanumeric characters.

Remote Maintenance by telnet

Table of Contents

Pro c700ex