Wins - Ricoh Pro C550ex Network Manual

wins

Use the "wins" command to configure WINS server settings.
Viewing settings
msh> wins
• If the IPv4 address obtained from DHCP differs from the WINS IPv4 address, the DHCP address
is the valid address.
Configuration
msh> wins "interface_name" {on|off}
• {on} means "active" and {off} means "inactive".
• Be sure to specify the interface.
Interface name
ether
Address configuration
Use the following command to configure a WINS server IP address:
wins "interface_name" {primary|secondary} "IP address"
• Use the "primary" command to configure a primary WINS server IP address.
• Use the "secondary" command to configure a secondary WINS server IP address.
• Do not use "255.255.255.255" as the IP address.
NBT (NetBIOS over TCP/IP) Scope ID Selection
You can specify the NBT scope ID.
msh> wins "interface_name" scope "scope ID"
• The scope ID can be entered using up to 31 alphanumeric characters.
• Be sure to specify the interface.
Interface name
ether
Remote Maintenance by telnet
Interface configured
Ethernet interface
Interface configured
Ethernet interface
1
45