Frequency - FUTABA 8FG Instruction Manaul

FREQUENCY

FASST mode selection
The receiver type will determine whether you
utilize MULTI or 7CH setting in "FASST".
MULTI/7CH: FASST-2.4GHz system (Multi-ch
mode/7ch mode)
Select the MULTI setting for all Futaba FASST-
2.4G Multi-ch mode receivers, regardless of
number of channels (e.g., 6008HS/R6014HS/
R608FS/R6014FS). 7CH setting for all Futaba
FASST-2.4G 7ch mode receivers, regardless of
number of channels (e.g., R6004FF/R616FFM/
R607FS/R617FS).
● Select [FREQUENCY] in the Linkage
menu and access the setup screen
shown below by touching the RTN
● Select the function name
and return to the Linkage
menu by touching the
RTN button.
FASST mode selection
1. Move the cursor to the "FASST" item and
touch the RTN button to switch to the data
input mode.
Select the mode by scrolling the touch
sensor. A confirmation message appears.
Touch the RTN button to change the mode.
(To terminate input and return to the original
state, touch the S1 button.)
*Transmission stops and then starts in the mode selected.
FASST mode selection and area mode selection
For the most up-to-date list of receivers and their
respective compatibility, please refer to our web
site at: http://2.4gigahertz.com/receivers/index.html
Area mode selection (Frequency range)
The T8FG transmitter has been designed
to function in many countries. If you will be
utilizing this transmitter in a country other than
France, please make sure that [AREA] is set to
"GENERAL". If, however, this transmitter will be
utilized in France, it must be set to "FRANCE" in
order to comply with French regulations.
Area mode selection
1. Move the cursor to the "AREA" selection and
touch the RTN button to switch to the data
input mode.
Select the Area by scrolling the touch sensor.
A confirmation message appears. Touch
the RTN button to change the mode. (To
terminate input and return to the original
state, touch the S1 button.)
*Transmission stops and then starts in the mode selected.
<SensorTouch™>
Scrolling
● Moving cursor
● Selecting mode
<Functions of Linkage Menu>