USING OTHER FUNCTIONS
USING THE FREQUENCY BOARD
1
Stick the band number seal to
the frequency board.
2
Install the frequency board to
the antenna.
Pass the frequency board over the
small part of the antenna and slide
it to the large part.
*Use side A or side B, depending on the
thickness of the antenna.
Cut off the unused side along the slot with
cutters, etc.
Spare servo horns are supplied with the digital proportional R/C set. Use them ac-
cording to the application.
Use the horn set screw supplied
with the servo.
NON-SLIP ADJUSTABLE LEVER HEAD
The length of the stick lever head can be adjusted.
Lever head A
1
Unlock lever heads A and B by
turning them in the arrow direc-
tions.
SERVO HORN
Lever head B
Side A
Frequency board
Band number seal
(after sticking)
If a long screw is used, the interior of the
servo may be damaged.
2
Set the stick to the most com-
fortable length and lock the lever
heads by turning them in the op-
posite direction of the arrows.
Side B