Table of Contents
Advertisement
Installation
Instructions
Your new refrigerator was packed carefully for shipment. Remove and discard shelf pack-
ing clips (if used) located just above each shelf where they hook onto the frame. To
remove plastic clips wiggle the clips sideways and pull straight out.
Location
of Your
Leveling
is Important
R e f ri g
e
ra t o r
Toenhance itsappearance
and tomaintain efficient perfor-
• Allow for a free flow of air through the front base grille,
mance, your refrigerator should be level.
• Install the refrigerator where the room temperature will
For refrigerators with 4 fixed wheels (models JTBI986,
not go below 55 ° E With temperatures below 55°, the
JTB2186):
refrigerator will not run frequently enough to maintain
• Adjust the leveling screws beneath each front comer at
proper temperature in the freezer,
the base of the cabinet. Turn these leveling screws clock-
wise to raise a cabinet comer and counterclockwise to
• Allow a minimum 1/2" clearance on the sides, top and
lower a cabinet comer (see fig. 3).
back for ease of installation. If refrigerator is placed
with the door hinge side against a wall, you may want to
• If the floor is not level and it is necessary to raise the rear
allow additional space so the door can be opened wider,
of the cabinet, we suggest roiling the rear wheels onto a
piece of plywood or other shim material.
• Use caution when installing the unit on vinyl or hard-
wood floors so as not to mark or otherwise damage the
For all other models:
flooring. A piece of plywood, a rug or other material
• Grasp both ends of the base grille and pull straight out to
should be used to protect the floor while positioning the
remove (see fig. 1).
unit.
• Adjust the wheels with a screwdriver or a 1/4" socket
(see fig. 2).
• To prevent the refrigerator from rolling, use the level-
ing/lock screws. (see fig. 3). To lock the cabinet in place,
turn down both levering screws
]----
Fig. 1
TURN CLOCKWISE TO
I
RAISE CABINET CORNER
- _ _ s
B
TURN
COUNTER-CLOCKWISE
TO LOWER CABINET
CORNER
Fig. 3
Fig. 2
Advertisement
Table of Contents
