Usb Connection Setup - Fuji Xerox DocuPrint CP225 w User Manual

Getting the Driver File
1
Insert the Software Pack CD-ROM into your computer.
2
Extract the zip file in the following path to your desired location.
D:\Drivers\XPS\Win_7Vista
D:\Drivers\XPS\Win_8
(in case your optical disk drive is D)
NOTE:
• XPS stands for XML Paper Specification.
Installing the Print Driver

• USB Connection Setup

Windows Vista or Windows Vista 64-bit Edition
1
Click Start  Control Panel
2
Click Add a printer.
3
Click Add a local printer.
4
Select the port connected to your printer, and then click Next.
5
Click Have Disk to display the Install From Disk dialog box.
6
Click Browse, and then select the extracted setup information (.inf) file in "Getting the Driver File" on page 49.
7
Click Open.
8
Click OK.
9
Select your printer name, and then click Next.
10
To change the printer name, enter the printer name in the Printer name box.
To use this printer as the default printer, select the Set as the default printer check box displayed under the
Printer name.
11
Click Next.
Installation starts.
If the User Account Control dialog box appears, click Continue.
NOTE:
• If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired
action.
12
Upon completion of the driver installation, click Print a test page to verify installation.
13
Click Finish.
 Hardware and Sound  Printers.
Printer Connection and Software Installation 49