Gateway M275 User Manual page 99

3
Hold the replacement module at a 30-degree angle and press it into
the empty memory slot. This module is keyed so it can only be
inserted in one direction. If the module does not fit, make sure that
the notch in the module lines up with the tab in the memory bay.
Important
4
Gently push the module down until it clicks in place.
Reattaching the keyboard
To reattach the keyboard:
1
Rotate the keyboard toward the LCD panel until the keyboard is
almost face-up.
2
Insert the tabs on the front of the keyboard under the palm rest.
Use only memory modules designed for the
Gateway M275.
Tabs
www.gateway.com
Adding or replacing memory
93