Display Message - Mercedes-Benz CLS Operator's Manual

Lights
Display messages
b
Check Left Low Beam
(example)
b
Active Headlamps
Inoperative
b
Malfunction See
Operator's Manual
b
Auto Lamp Function
Inoperative
b
Switch Off Lights
Adaptive Highbeam
Assist Currently
Unavailable See
Operator's Manual
Adaptive Highbeam
Assist Inoperative
Possible causes/consequences and M Solutions
The corresponding bulb is faulty.
Visit a qualified specialist workshop.
X
i
LED light sources: the display message for the corresponding
lamp only appears when all the LEDs in the lamp have failed.
The active light function is faulty.
Visit a qualified specialist workshop.
X
The exterior lighting is defective.
Visit a qualified specialist workshop.
X
The light sensor is defective.
Visit a qualified specialist workshop.
X
You leave the vehicle and the lights are switched on. A warning tone
also sounds.
Turn the light switch to position Ã.
X
Adaptive Highbeam Assist is deactivated and temporarily inoperative.
Possible causes are:
the windshield in the camera's field of vision is dirty.
R
visibility is impaired due to heavy rain, snow or fog.
R
Clean the windshield.
X
If the system detects that the camera is fully operational again, the
Adaptive Highbeam Assist Now Available
Adaptive Highbeam Assist is operational again.
Adaptive Highbeam Assist is faulty.
Visit a qualified specialist workshop.
X
I n f o r ma t i o n P r o v i d e d b y :
Display messages
message is displayed.
221
Z