HP Elite 7300 MT Servicing Manual page 14

3.
Slide the CD/DVD drive all the way into the slot.
4. To lock the CD/DVD drive in place, move "Lever
A" to the number "2" position. Slide the CD/
DVD drive out slightly until "Lever A" latches into
position to secure the drive.
If you have more than one CD/DVD drive to
install, repeat this step. However, instead of
moving "Lever A", move "Lever B."
12 Upgrading and Servicing Guide
5.
Connect the cables to the back of the CD/DVD
drive.
6.
Reattach the front bezel by inserting the three
tabs into the slots on the computer, and then
close the bezel door until it locks in place.
Features may vary by model.