Denon AVR-E300 Service Manual page 51

Error
Details of Error code
Code
DSP, PLD etc. failed to receive
5C firmware for rewriting sent from
DM860A (when timed out).
DSP, PLD etc. failed to receive
5D firmware for rewriting sent from
DM860A (when an error occurred).
Data in firmware such as DSP and
PLD for rewriting sent from DM860A
5E
was invalid (when a Check Sum
error occurred).
Invalid data in firmware such as
DSP and PLD for rewriting sent
5F
from DM860A was invalid (invalid
data was received).
NACK was received when "P"
60
command sent to DSP, PLD etc.
NACK was received when "I"
61
command sent to DSP, PLD etc.
Acquisition of serial flash data failed
80
before serial flash was deleted.
Deleting data failed before serial
81
flash was rewritten.
Receiving firmware for rewriting
82 serial flash sent by DM860A failed
(when timed out).
Receiving firmware for rewriting
83 serial flash sent by DM860A failed
(when an error).
Receiving firmware for rewriting
84 serial flash sent by DM860A failed
(when a Check Sum error).
Receiving firmware for rewriting
85 serial flash sent by DM860A failed
(when invalid data was received).
The data verification was invalid after
86
serial flash was rewritten.
Acquisition of (Application Mode) IP
A0 address failed before DM860A was
rewritten (AutoIP).
Acquisition of (Application Mode) IP
A1 address failed before DM860A was
rewritten (when timed out).
Invalid login via DPMS access
was notified when DM860A related
A2
firmware was rewritten (Application
Mode).
Display
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t e C h e c k N G
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
C o n n e c t i o n F a i l A 0
C o n n e c t i o n F a i l A 1
L o g i n f a i l e d
51
Turn off and on the power.
f a i l 5 C
Updating starts automatically.
Turn off and on the power.
f a i l 5 D
Updating starts automatically.
Turn off and on the power.
f a i l 5 E
Updating starts automatically.
Turn off and on the power.
f a i l 5 F
Updating starts automatically.
Turn off and on the power.
f a i l 6 0
Updating starts automatically.
Turn off and on the power.
6 1
Updating starts automatically.
Turn off and on the power.
f a i l 8 0
Updating starts automatically.
Turn off and on the power.
f a i l 8 1
Updating starts automatically.
Turn off and on the power.
f a i l 8 2
Updating starts automatically.
Turn off and on the power.
f a i l 8 3
Updating starts automatically.
Turn off and on the power.
f a i l 8 4
Updating starts automatically.
Turn off and on the power.
f a i l 8 5
Updating starts automatically.
Turn off and on the power.
f a i l 8 6
Updating starts automatically.
Check the network connection.
Carry out the update in an
environment that has little network
load.
Check the network connection.
Carry out the update in an
environment that has little network
load.
Check the network connection.
Carry out the update in an
A 2
environment that has little network
load.
Coping strategies