Assembly Instructions; To Use As A Floor Fan; To Adjust Airflow Up And Down; To Install As A Wall Fan - Utilitech HV-18S180 Use And Care Manual

ASSEMBLY INSTRUCTIONS

1. TO USE AS A FLOOR FAN

The fan comes fully assembled.
No further assembly is required.

TO ADJUST AIRFLOW UP AND DOWN

Tilt the fan to the desired angle.
Tighten the plastic nut tightener (AA) on
both tilt nuts to secure fan head (Fig. 1).

2. TO INSTALL AS A WALL FAN

Feed the screws (BB) through the curved washers
(CC) and the two holes on the fan stand (B) to
secure the fan to the wall.
WARNING
Mount fan on a wooden wall only.
To reduce the risk of electric shock and personal
injury, ensure the location for mounting is
able to support this fan.
Total weight of fan is 15 lbs.
It is recommended a qualified electrician mount
this fan.
TO ADJUST AIRFLOW UP AND DOWN
Tilt the fan to the desired angle.
Tighten the plastic nut tightener (AA) on
both tilt nuts to secure fan head (Fig. 2)．
HARDWARE USED
AA
P a l s c i t N t u T
BB
Screw
CC
C u v r e d W a s
g i h e t n r e
h r e
1
2
CC
B
AA
5
AA
BB
x 2
x 2
x 2