Preparation - Utilitech HV-18S180 Use And Care Manual

CAUTION
• CONSIDER YOUR WORK AREA ENVIRONMENT. Don't use fan in damp or wet locations.
Don't operate fan in presence of flammable liquids, gases like gasoline or other fuels, lighter
fluid cleaners, oil-based paints, natural gas, hydrogen, coal dust, magnesium dust, grain dust,
or explosive dust like powder. Do not use or store near hazardous or toxic materials.
• USE SAFETY GLASSES. Also use face or dust mask if work area is dusty. The operation of
any fan can result in foreign objects being blown into the eyes, which can result in severe eye
damage. Always wear safety goggles complying with ANSI Z87.1.
• DON'T ABUSE CORD. Never pull the power cord or yank it to disconnect from receptacle.
To unplug, grasp the plug, not the cord. Keep cord away from heat, oil, and sharp edges.
Do not pull or carry by cord, use cord as handle, close a door on cord, or pull around sharp
edges or corners.
• MAINTAIN fan. Keep fan clean at all times. Keep dry, clean and free from moisture.
• DISCONNECT fan when not in use. Don't operate unit unattended.
• NEVER stick any object into the grille openings of the fan.
• RETURN for repair or to replace damaged parts if any are found to be broken or if the fan is
inoperative.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. lf any part is missing or damaged, do not attempt to
assemble or operate the product.
Estimated Assembly Times:
Tools Required for Assembly: Phillips Screwdriver (not included)
45 minutes for wall fan
3/32 in. Drill Bit (not included)
4