Toastmaster tm-11sk Instruction Manual page 4

LINE CORD SAFETY TIPS
1. Never pull or yank on cord or the appliance.
2. To insert plug, grasp it firmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove it from outlet.
4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are
found, this indicates that the appliance should be serviced and the line cord replaced.
5. Never wrap the cord tightly around the appliance, as this could place undue stress
on the cord where it enters the appliance and cause it to fray and break.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
IMPORTANT
During the first few minutes of initial use, you may notice smoke and/or a slight odor.
This is normal and should quickly disappear. It will not recur after appliance has been
used a few more times.
Attaching the Removable Temperature Probe:
Use TOASTMASTER Removable Temperature Probe Only (TP-02).
1. Ensure that the Removable Temperature Probe is unplugged before attaching.
To attach Temperature Probe to the pan, align the Temperature Probe with the
terminals of the pan.
2. Gently slide Temperature Probe forward until it meets the pan.
3. Before using, ensure the Temperature Probe is snug against the pan.
Temperature Probe is loose, it is not assembled correctly.
4. Ensure the Adjustable Heat Dial is in the OFF position.
5. Plug in the cord and then set Heat Dial to desired heat level.
6. Skillet is now ready for use.
Detaching the Removable Temperature Probe:
1. Turn Adjustable Heat Dial OFF and unplug the cord.
2. Allow pan to cool before disconnecting Temperature Probe.
3. Gently pull Temperature Probe straight out avoiding any damage to the Temperature
Probe.
4
If the