1. OWNER’S MANUAL & SAFETY INSTRUCTIONS 1.1. How to read the manual. 1.1.1. Keep this manual for the safety warnings and precautions, assembly, operation, inspection, maintenance and cleaning procedures. 1.1.2. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Page 4
2.2.4. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 2.2.5. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
2.4.7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. 2.4.8. Use of the power tool for operations different from those intended could result in a hazardous situation.
Page 6
3.6. Always use the correct type of disc for the operation to be carried out. Do not use a grinding disc as a cutting disc. 3.7. Only use cutting and grinding discs that are in good condition. This will improve cutting and reduce the load on the machine ensuring a longer life of the cutting tools and the angle grinder.
5. ASSEMBLY Power supply the power tool supply must match the data plate on tool. 5.1. Attaching the side handle. 5.1.1. Thread side handle into side handle socket on desired position and tighten securely. Please use the side handle fully. Tool must be used the side handle.
N.B See part locations on previous page. 5.4.1. To turn ON press the power switch (10), tool starts, then press the switch lock button (11) when it is pressed, the tool is in its working state. 5.4.2. To turn OFF press and release (10) and the switch lock button will automatically pop out, the tool will stop working.
6.10. During use it is advisable to periodically check the security of the disc clamping nut, side handle and disc guard. 6.11. Never immerse the grinding/cutting disc into any type of lubricant including water. The angle grinder is a dry grinder/cutter. Failure to observe this may result in a fatal electric shock. 6.12.
Email contact; Technical service@genpower.co.uk 10.4. Web site; www.hyundaipowerequipment.co.uk 11. DECLARATIONS OF CONFORMITY 11.1. Genpower Ltd confirms that this Hyundai product conform to the following CE Directives; 11.1.1. 2006/42/EC Machinery Directive 11.1.2. 2004/108/EC EMC Directive 11.1.3. 2006/95/EC Low Voltage Directive Page 11...