Variable Frequency (Hz) Generator Power Receptacle Rc3 - Miller Electric 280 NT Owner's Manual

7-2. Variable Frequency (Hz) Generator Power Receptacle RC3

Notes
.
A complete Parts List is available at www.MillerWelds.com
2
1
NOTICE − Do not operate equipment
requiring a constant frequency from
variable frequency receptacle RC3.
1 120 V 20 A Variable Frequency
AC Receptacle RC3
Receptacle supplies single-phase
power continuously. Frequency (Hz)
of generator power output changes
with engine speed. Total output avail-
able is 2.4 kVA/kW.
2 Supplementary Protector CB3
CB3 protects receptacle RC3 and
115 volt ac output to Remote Recep-
tacle RC4 from overload. If CB3
opens, the receptacle does not work
and 115 volt ac output at RC4 stops.
.
Press button to reset. If supple-
mentary protector continues to
open, contact a Factory Autho-
rized Service Agent.
Ref. 216 172-D
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
OM-4430 Page 31