Canon imageRUNNER Advance 6275 Basic Operation Gude page 88

Insert a new staple cartridge into the staple case.
4
• Do not remove the seal that holds the staples together before you place the staple cartridge into the
staple case.
• Only one staple cartridge can be inserted at a time.
• Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear.
Gently push the staple case back into the fi nisher and push down fi rmly until it
5
is securely in place.
Close the front cover of the fi nisher.
6
When closing the front cover of the fi nisher, be careful not to get your fi ngers caught, as this may
result in personal injury.
After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition
the staples.
88
1. Insert a new staple cartridge.
2
2. Press the spring-loaded
3. Remove the seal holding the
1
3
case down until it clicks into
place.
staples together, by pulling
it straight out.