Canon imageRUNNER Advance 6275 Basic Operation Gude page 202

Q&A
34
How do I print the data received
from specific destinations only?
You can set the Store/Print
Received File mode in Forwarding
Settings to print the data received
from specific destinations only.
■ Printing for Specific
Destinations Only
1. Press
2. Press [Function Settings]  [Receive/
Forward]  [Common Settings].
3. Press [Forwarding Settings] 
[Register]  specify the destinations in
[Conditions].
4. Set <Store/Print Received File> to 'On' 
press [OK]  [Close].
■ Forwarding to the Confidential
Fax Inbox for Other
Destinations
1. Press
2. Press [Function Settings]  [Receive/
Forward]  [Common Settings].
3. Press [Forwarding Settings]  [Forward
w/o Conditions]  specify the
Confidential Fax Inbox as the forwarding
destination.
4. Press [OK]  [Close].
202
(Settings/Registration).
(Settings/Registration).
Additional Information
• If the Fax Memory Lock is being used,
received data is stored in the Memory RX
Inbox without being printed.
• For more information, see e-Manual >
Settings/Registration.
35
What is the model number of the
staple cartridge for the finisher or
the stamp cartridge for the feeder?
The model numbers of the
consumables for the feeder and
finisher are as follows:
■ Stamp Ink Cartridge-C1
For the feeder
Staple-J1
■
For the Staple Finisher-P1 and Booklet
Finisher-P1
■ Staple Cartridge-D2/Staple
Cartridge-D3
For the Booklet Finisher-P1
Additional Information
For information on replacing the staple
cartridges and stamp cartridges, see
Chapter 3, "Routine Maintenance."