Canon imageRUNNER Advance 6275 Basic Operation Gude page 189

■ To register the settings as the
default settings:
1. Press [Scan and Send]  specify the scan
settings and the file format.
2. Press  [Change Default Settings]
 [Yes].
Additional Information
For more information on each file format,
see e-Manual > Scan and Send.
11
Is there a way to prevent a
transmission error when sending a
facsimile to a new destination?
If [Confirm Entered Fax Number]
in (Settings/Registration) is
set, a screen to enter the number
for confirmation is displayed. By
entering the number again, you
can reduce the risk of transmission
error.
■ Setting procedure:
1. Press (Settings/Registration).
2. Press [Function Settings]  [Send] 
[Fax Settings].
3. Press [Confirm Entered Fax Number] 
[On]  [OK].
Additional Information
• To perform this procedure, you must
have administrator privileges. For more
information, see e-Manual > Security.
• You can also restrict sending to a
destination that is not stored in the
Address Book. For more information, see
e-Manual > Security.
Q&A
189