Canon imageRUNNER Advance 6275 Basic Operation Gude page 209

45
I want to check the IP address for
this machine to run the Remote UI,
but I do not know how to check it.
You can check the IP address from
the touch panel display of this
machine.
■ Checking the IP Address of This
Machine:
IPv4 Address
1. Press (Settings/Registration).
2. Press [Preferences]  [Network]  [TCP/
IP Settings].
3. Select [IPv4 Settings]  [Use IPv4] 
[On].
4. Press [IP Address Settings].
IPv6 Address
1. Press (Settings/Registration).
2. Press [Preferences]  [Network]  [TCP/
IP Settings].
3. Select [IPv6 Settings]  [Use IPv6] 
[On].
4. Press [Manual Address Settings].
■ Starting the Remote UI:
Run the Web browser for the computer 
enter 'http://<IP address of the machine>' in
the address bar.
Additional Information
• To perform this procedure, you must
have administrator privileges. For more
information, see e-Manual > Security.
• If you cannot start the Remote UI, specify
the following settings.
1. Press (Settings/Registration).
2. Press [Management Settings] 
[License/Other]  [Remote UI].
3. Press [On]  [OK].
Q&A
209