Dvd micro hi-fi system with docking for ipod
user manual
warranty information inside. please read
www.teac.com.au
important !
trademark of teac corporation japan
/iphone/ipad (16 pages)
Page 1
LPU192CD Hi-Fi Turntable Stereo System USER MANUAL IMPORTANT ! WARRANTY INFORMATION INSIDE. PLEASE READ www.teac.com.au Trademark of TEAC Corporation JAPAN...
Important Safety Instructions Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water . Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifers) that produce heat.
Control Location Dust Cover Turntable Tone arm 45 RPM Adaptor Tone arm control lever Auto stop control switch Speed selector Hold Down Clip Tone arm rest FRONT SIDE LCD Display SOURCE button M+ / button P-MODE/MEM button M- / button TUN+/- VOLUME Control Controls...
Power Source This unit operates using the supplied AC Adapter (Operate at 240 V ~ 50Hz) Connecting AC Adaptor NOTE: Only use the supplied adapter. Plug the AC adaptor into normal power outlet socket. Insert the DC plug of the AC adaptor cord into the DC IN Jack at the back of the unit. Switching On for the first time Plug into AC power by following instructions on the previous Connecting AC adaptor section.
Care And Maintenance of Disc WARNING! THIS PRODUCT USES A CLASS 1 LASER. AVOID ANY DIRECT EXPOSURE TO THE LASER BEAM. USE OF CONTROLS, ADJUSTMENTS OR PROCEDURES NOT LISTED IN THIS GUIDE MAY RESULT IN HAZARDOUS EXPOSURE. Handling Compact Discs To remove a CD from its storage case, press down on the center of case and lift the disc out.
Stop playback To stop playback, press the M- / button on the unit. The total number of tracks of the CDs / MP3 Disc / USB will be displayed. Skip track During playback, tune the TUN+ / or TUN- / controls to skip to the next or previous tracks.
4. Repeat steps 2-3 to program up to 20 tracks. 5. Press the M+ / button to play the programmed tracks after programming is completed. The “PROG” icon will be displayed during the programmed playback. 6. Tune the TUN+ / or TUN- / controls repeatedly until you reach the desired programmed tracks number.
Saving an FM Radio Station 1. Follow the instructions for Tuning the FM Radio. 2. Adjust the TUN+ / or TUN- / controls to tune the FM radio to the desired station. 3. Press the P-MODE / MEM button on the front of unit, flash MEM icon and preset number P01 will appear on the LCD display, indicating which preset the current station will be saved to.
ADAPTER for 45 RPM (Accessory) This adaptor allows you to play 45 RPM records. 1. Place the 45 RPM ADAPTER over the spindle. 2. Gently place your 45 RPM record onto the turntable. 3. Follow the steps under turntable operation to play you record. USB RECORDING From Turntable 1.
Specifications 0.8 watt RMS x 2 channels (Turntable Section) Power Output....1.5 watt RMS x 2 channels (CD, USB, RADIO, AUX-IN Section) Speakers ..... . 4 Ohms 5W x 2 CD Disc- Disc Diameter .
Page 14
In the event of a product failure within the warranty period, please call the TEAC Warranty Service Hotline 1300 553 315 Between Monday to Friday - 8.30AM to 5PM AEST *Please have your purchase receipt and the product’s serial number ready For other enquiries and support please visit www.teac.com.au...