Chevrolet 1998 C/K Full-Size Pickup Owner's Manual page 251

Using a Transfer Case Mounted Power
Take-Off (Automatic Transmission)
1.
2.
3.
4.
5.
6.
7.
Set the parking brake.
Turn the ignition off.
Shift the transfer case into NEUTRAL (N).
Shift the transmission into NEUTRAL (N).
Engage the PTO.
If you are going to drive the vehicle, shift the
transfer case into the range you want. Turn the
ignition to START. Then apply the regular brakes
and release the parking brake.
Shift the transmission to THIRD (3) to start the' PTO.
Release the regular brakes to drive the vehicle.
Disengaging a Power Take-OFF
1. Turn the ignition off.
2. Put the transmission in PARK (P).
3. Release the PTO
4. Restart the engine.
Step-Bumper Pad
If your vehicle has
a
rear step bumper, it may be
equipped with a rear step pad at the center of
the bumper.
If
you
will be using the
bumper to tow
a
trailer, you
must remove the center
cutout circle to install the
trailer ball. You must also
remove both outer cutouts
to attach the trailer
safety chains.
To remove the pad, lift the
edge of the pad from the
rear of the bumper and
swing it forward. When the
pad releases from the
bumper holes, lift the
pad off.
4-63