Table of Contents
Advertisement
Connect the right-angle side
of SATA signal cable to SATA
device. Or you may connect the
right-angle side of SATA cable to
the onboard SATA port to avoid
mechanical conflict with huge
graphics cards.
4.
CPU, chassis, and power fan connectors
(4-pin CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN)
The fan connectors support cooling fans of 350 mA~2000 mA (24 W max.)
or a total of 1 A~7 A (84 W max.) at +12V. Connect the fan cables to the fan
connectors on the motherboard, making sure that the black wire of each
cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors!
M2N-PLUS SLI Fan connectors
•
•
2-26
M2N-PLUS SLI
®
Only the CPU_FAN and CHA_FAN connectors support the ASUS Q FAN2
feature.
If you install two VGA cards, we recommend that you plug the rear
chassis fan cable to the motherboard connector labled CHA_FAN
for better themal environment.
right angle side
CPU_FAN
PWR_FAN
GND
+12V
Rotation
CHA_FAN
GND
+12V
Rotation
Chapter 2: Hardware information
Advertisement
Table of Contents
