Cadillac CTS Owner's Manual page 60

Manually Recalling Memory
Positions
Press and hold 1, 2, or
manually recall the previously
stored memory positions. Releasing
1, 2, or before the stored
positions are reached stops the
recall.
Automatically Recalling Memory
Positions
If programmed in the vehicle
personalisation Menu, the Auto
(Automatic) Memory Recall feature
automatically recalls the current
driver's previously stored 1 or 2
position when the ignition is
changed from off to ON/RUN/
START or ACC/ACCESSORY.
The transmission must be in
P (Park).
See Vehicle Personalisation 0 146.
To stop recall movement, press one
of the memory, driver seat, outside
mirror, or power tilt and telescoping
steering column controls.
RKE transmitters are not labelled
with a number. If your memory seat
position is stored to 1 or 2 but this
to
position is not automatically
recalling, then store your positions
to the other button or switch RKE
transmitters with the other driver.
If the vehicle's driver has changed,
in some vehicles the Driver ID may
be displayed for the first few ignition
cycles.
Easy Exit Recall
If programmed on in the vehicle
personalisation menu, the Easy Exit
feature recalls the previously stored
(Exit) positions when leaving the
vehicle. See Storing Memory
Positions listed previously. See
also Vehicle Personalisation 0 146.
Easy Exit Recall automatically
activates when one of the following
occurs:
The vehicle is turned off and the
driver's door is opened within a
short time.
The vehicle is turned off with the
driver's door open.
Seats and Restraints
Obstructions
If something has blocked the driver
seat and/or the power tilt and
telescoping steering column while
recalling a memory position, the
recall may stop. Remove the
obstruction. Then do one of the
following:
If automatically or manually
recalling the stored memory
position, press and hold the
appropriate manual control for
two seconds. Try recalling again
by pressing the appropriate
memory button, then try recalling
again by opening the driver door
and pressing on the RKE
transmitter..
If recalling the exit position,
press and hold the appropriate
manual control for the exit
feature not recalling for
two seconds. Then try recalling
the exit position again.
If the memory position is still not
recalling, see your dealer for
service.
59