Cadillac CTS Owner's Manual page 219

218 Driving and Operating
occurs when cruise control is
activated, cruise control is
disengaged. See Forward Collision
Alert (FCA) System 0 234. When
road conditions allow the cruise
control to be safely used, cruise
control can be turned back on.
If the brakes are applied, the cruise
control disengages.
J
(On/Off) : Press to turn the
system on and off. A white indicator
appears in the instrument cluster
when cruise is turned on.
+RES (Resume/Accelerate) : If
there is a set speed in memory,
press the control up briefly to
resume to that speed or press and
hold to accelerate. If the cruise
control is already active, use to
increase vehicle speed. To increase
speed by 1 km/h (1 mph), press
+RES up to the first detent. To
increase speed to the next 5 km/h
(5 mph) mark on the speedometer,
press +RES up to the second
detent.
SET (Set/Coast) : Press the
control down briefly to SET to set
the speed and activate cruise
control. If cruise control is already
active, use to decrease vehicle
speed. To decrease speed by
1 km/h (1 mph), press SET down
to the first detent. To decrease
speed to the next 5 km/h (5 mph)
mark on the speedometer, press
SET down to the second detent.
(Cancel) : Press to disengage
cruise control without erasing the
set speed from memory.
Setting Cruise Control
J
If the button is on when not in
use, SET or +RES could get
pressed and go into cruise when not
J
desired. Keep the button off
when cruise is not being used.
J
1. Press .
2. Get up to the desired speed.
3. Press and release SET .
4. Remove foot from the
accelerator.
When the cruise control has been
set to the desired speed, a green
cruise control indicator appears on
the instrument cluster and a cruise
set speed message appears on the
Head-Up Display (HUD),
if equipped.
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied or is pressed, the
cruise control is disengaged without
erasing the set speed from memory.