Cadillac CTS Owner's Manual page 192

Tyre and Loading Information
Label
Label Example
A vehicle-specific Tyre and
Loading Information label is
attached to the vehicle's centre
pillar (B-pillar). The Tyre and
Loading Information label shows
the size of the original tyres and
the recommended cold tyre
inflation pressures. For more
information on tyres and
inflation, see Tyres 0 286 and
Tyre Pressure 0 289.
There is also important loading
information on the Certification
label. It may show the Gross
Vehicle Weight Rating (GVWR)
and the Gross Axle Weight
Rating (GAWR) for the front and
rear axle. See Certification
Label later in this section.
Steps for Determining Correct
Load Limit
Locate the statement The
1.
combined weight of
occupants and cargo should
Driving and Operating
never exceed XXX kg or
XXX lbs. on your vehicle's
placard.
Determine the combined
2.
weight of the driver and
passengers that will be
riding in your vehicle.
Subtract the combined
3.
weight of the driver and
passengers from XXX kg or
XXX lbs.
The resulting figure equals
4.
the available amount of
cargo and luggage load
capacity. For example, if the
XXX amount equals
1400 lbs. and there will be
five 150 lb passengers in
your vehicle, the amount of
available cargo and luggage
load capacity is 650 lbs.
(1400-750 (5 x 150) =
650 lbs.)
191