Miller Electric OM-193 084E Owner's Manual page 14

3
2
7
2
OM-193 084 Page 10
1
4
V
> 60 s
8 9
1
= <60
3 4
5 6
V
V
S-185 836
10
S-179 309-A
5
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Electric shock from wiring can
kill.
3 Disconnect input plug or
power before working on
machine.
4 Hazardous voltage remains
on input capacitors after
power is turned off. Do not
touch fully charged
capacitors.
5 Always wait 60 seconds after
power is turned off before
working on unit, OR
6 Check input capacitor voltage,
and be sure it is near 0 before
touching any parts.
7 When power is applied failed
parts can explode or cause
other parts to explode.
8 Flying pieces of parts can
cause injury. Always wear a
face shield when servicing
unit.
9 Always wear long sleeves and
button your collar when
servicing unit.
10 After taking proper
precautions as shown,
connect power to unit.
11/98
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Falling equipment can cause
injury and damage to unit.
3 Always lift and support unit
using both handles. Keep
angle of lifting device less
than 60 degrees.
4 Use a proper cart to move
unit.
5 Do not use one handle to lift
or support unit.
1/96