Sony Trinitron KV-2193MF1 Operating Instructions Manual page 10

Displaying on-screen information
Press DISP/REVEAL.
The program position, local system, and TV settings are
displayed on the screen.
1
AUTO B/G
DYNAMIC MUSIC
Setting the Wake Up Timer
You can set the TV to automatically turn on as you
have programmed.
1
Press WAKE UP/INDEX repeatedly to set the
timer.
The on-screen display appears and the WAKE UP
indicator on the TV lights up.
WAKE UP TIMER:10M
After 10 minutes
WAKE UP TIMER:OFF
No wake up timer
2
If you want a particular TV program or
video input to be displayed using the Wake
Up Timer, select the TV program or video
input.
3
Press POWER on the remote commander or
set the Sleep Timer to turn off the TV in
standby mode.
To cancel the Wake Up Timer, press WAKE UP/
INDEX repeatedly until "WAKE UP TIMER: OFF"
appears, or turn off the main power of the TV.
Notes
• The Wake Up Timer starts immediately after the on-screen
display disappears.
10
Operations
DISP
REVEAL
WAKE UP
INDEX
WAKE UP TIMER:12H00M
After 12 hours
• The last TV program position or video input just before the TV
turns into standby mode will appear when the TV is turned on
using the Wake Up Timer.
• If no buttons or controls are pressed for more than two hours
after the TV is turned on using the Wake Up Timer, the TV
automatically turns into standby mode. If you want to
continue watching the TV, press any button or control on the
remote commander or the TV.
Setting the Sleep Timer
You can set the TV to automatically turn off as you
have programmed.
Press SLEEP/TEXT CLR.
SLEEP TIMER:30M
After 30 minutes
SLEEP TIMER:OFF
No sleep timer
To cancel the Sleep Timer, press SLEEP/TEXT CLR
repeatedly until "SLEEP TIMER: OFF" appears, or turn
off the TV.
Changing the on-screen display
language
You can use buttons on the remote commander or the
TV to change the on-screen display language.
÷
1
Press SELECT until the screen appears as
follows:
SELECT
2
Press + or – to select "
Note
• You can also use SELECT and VOLUME +/– on the TV to
select the on-screen display language.
SLEEP
TEXT CLR
SLEEP TIMER:60M
After 60 minutes
SLEEP TIMER:90M
After 90 minutes
0
+ or –
SELECT
LANGUAGE/ :ENGLISH
".
:LANGUAGE/