Related Manuals for Sony Trinitron KV-2193MF1
Summary of Contents for Sony Trinitron KV-2193MF1
- Page 1 3-862-886-11 (1) ® Trinitron Color TV Operating Instructions KV-2193MF1 KV-2193MF1A ©1998 by Sony Corporation...
- Page 2 p KV-2193MF1 only...
- Page 3 TV SYSTEM AUTO PROGR TV SYSTEM AUTO PROGR p KV-2193MF1A only...
-
Page 4: Getting Started
Getting Started Connections Connecting a VHF antenna or a combination VHF/UHF antenna — 75-ohm coaxial cable (round) Attach an optional IEC antenna connector to the 75-ohm coaxial cable. Plug the connector into the (antenna) socket at the rear of the TV. Rear of TV Rear of TV On a wall... - Page 5 Connecting optional equipment You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder, video game or stereo system. Connecting video equipment using video input jacks to antenna socket Rear of TV to antenna AUDIO VIDEO output...
-
Page 6: Presetting Channels
Presetting channels Presetting channels manually using the buttons on the TV Press MANUAL PROGR. Press PROGR +/– on the remote commander until the required program position appears on the screen. Press TV SYSTEM until your local TV system You can preset up to 100 TV channels in numerical appears. - Page 7 Presetting channels automatically Presetting channels manually using the using the remote commander remote commander + or – Press SELECT until “TV SYSTEM” appears. SELECT SELECT Press POWER to turn on the TV. POWER TV SYSTEM : B/G Press + or – to select your local TV system. When the TV is turned on in standby mode, press POWER on the remote commander.
- Page 8 If you are not satisfied with the picture and sound quality You may be able to further improve the picture and sound quality by using fine tuning as below: Select the program position you want to adjust. Press SELECT until “MANUAL PROGRAM” appears on the screen.
-
Page 9: Watching The Tv
Operations Watching the TV Turning off the TV To turn off the TV temporarily Press POWER on the remote commander. The STANDBY indicator on the TV lights up. POWER To turn off the TV completely Press POWER to turn on the TV. Press POWER on the TV. - Page 10 • The last TV program position or video input just before the TV Displaying on-screen information turns into standby mode will appear when the TV is turned on using the Wake Up Timer. • If no buttons or controls are pressed for more than two hours Press DISP/REVEAL.
- Page 11 Using the Child Lock Watching the picture feature in wide mode You can prevent a child from watching certain program You can adjust the display mode accordingly to fit the positions by using the buttons on the remote programs to your TV screen size. commander.
-
Page 12: Selecting The Sound Mode
Adjusting the Adjusting the sound Adjusting the sound and picture settings picture and picture Press SELECT until the item you want to adjust appears. SELECT Each time you press SELECT, the screen changes as follows: ÷ SOUND MODE PICTURE COLOR BRIGHT + or –... -
Page 13: Additional Information
Additional Information Good picture Troubleshooting Noisy sound / Check the TV SYSTEM setting. / Reduce the TREBLE level or select the “SOFT” sound mode. If you have any problems, read this manual again and Good picture check the countermeasure for each of the symptoms No sound listed below. - Page 14 Additional Information...
- Page 15 Additional Information...
-
Page 16: Specifications
Tube size (cm) Measured diagonally Screen size (cm) Measured diagonally 610 × 470 × 484 610 × 516 × 484 Dimensions (w/h/d,mm) Mass (kg) Design and specifications are subject to change without notice. Sony Corporation Sony Corporation Tokyo, Japan Tokyo, Japan...