Miller Electric cyclomatic DWF3 Owner's Manual page 5

THIS MANUAL HAS BEEN DESIGNED FOR EXPERIENCED WELDING EQUIPMENT OPERATORS AND
MUST BE READ COMPLETELY BEFORE USING THIS EQUIPMENT. IF YOU LACK EXPERIENCE OR
ARE UNFAMILIAR WITH THE PRACTICES AND SAFE OPERATION OF WELDING EQUIPMENT,
PLEASE CONSULT YOUR FOREMAN. DO NOT ATTEMPT TO INSTALL, OPERATE, OR PERFORM
MAINTENANCE ON THIS EQUIPMENT UNLESS YOU ARE QUALIFIED AND HAVE READ AND
UNDERSTAND THIS MANUAL. IF IN DOUBT ABOUT INSTALLING OR OPERATING THIS EQUIPMENT,
CONTACT YOUR DISTRIBUTOR OR THE CUSTOMER SERVICE DEPARTMENT.
Throughout this manual, NOTE, CAUTION, WARNING and DANGER are inserted to call attention to
particular information. The methods used to identity these highlights and the purpose for which each is used,
are as follows:
NOTE
OPERATIONAL, PROCEDURAL, AND BACKGROUND INFORMATION WHICH AIDS THE OPERATOR IN
THE USE OF THE MACHINE, HELPS THE SERVICEMAN IN THE PERFORMANCE OF MAINTENANCE,
AND PREVENTS DAMAGE TO THE EQUIPMENT.
CAUTION
AN OPERATIONAL PROCEDURE WHICH, IF NOT FOLLOWED, MAY CAUSE MINOR INJURY TO THE
OPERATOR, SERVICE PERSONNEL AND/OR BYSTANDERS.
WARNING
AN OPERATIONAL PROCEDURE WHICH, IF NOT FOLLOWED, MAY CAUSE SEVERE INJURY TO THE
OPERATOR, SERVICE PERSONNEL, OR OTHERS IN THE OPERATING AREA.
DANGER
AN OPERATIONAL PROCEDURE WHICH, IF NOT FOLLOWED, WILL CAUSE SEVERE INJURY OR
EVEN DEATH TO THE OPERATOR, SERVICE PERSONNEL OR BYSTANDERS.
! IMPORTANT !
DEFINITIONS
NOTE CAUTION WARNING DANGER