Table of Contents
Advertisement
4
Press or to select IP Address.
5
Press or to select the fi eld you want to
change, and then use the Number buttons to
input the IP address. To save the setting, press
OK.
Note:
IP address fi eld numbers must be between 0 and
255. After each fi eld number has been set, press
OK to store the entire address. If the entire IP
Address is invalid, a warning message will appear
after OK is pressed.
6
Press or to select Subnet Mask, and edit
in the same way as IP Address.
Note:
If you manually set the IP address, you must not use the
same IP address for any other device. The IP address
you use should be a private address.
MAC Address
You can view the fi xed MAC address.
1
From the PREFERENCES menu, select Network
Setup and press OK.
2
Press or to select MAC Address.
Using the software keyboard
You can enter text by using the Software Keyboard.
The Software Keyboard window will appear when
you press OK on a fi eld that accepts character input.
To enter text using the software keyboard:
1
Highlight the desired character on the on-
screen software keyboard.
2
Press OK.
3
Repeat steps 1 and 2 until you have entered all
desired text.
4
Press the BLUE button to close the software
keyboard and return to the previous screen.
Note:
If RETURN is pressed, changes are not saved and
the software keyboard window is closed. The text
will remain as it was before starting the keyboard.
48
Connecting your TV
Input operation on the remote control:
Button
OK
0-9
CC cc
Z
z
RED
GREEN
YELLOW
BLUE
RETURN
A
a 1 @
A A A |
A
B C D E F G
H
I
J K L M N
O P Q R S T U
V W X Y Z
Description
Inputs the selected character.
Inputs the number directly.
Moves the character highlight.
Moves the cursor.
Moves the cursor to the head of a
character string.
Moves the cursor to the end of a
character string.
Deletes 1 character to the left of the
cursor.
Cycles through upper case, lower
case, numbers, and symbols, if
available.
Chooses an accented version of the
current letter, if applicable.
Saves changes and closes the
Software Keyboard window.
Closes the Software Keyboard
window without saving changes.
Advertisement
Table of Contents
