Using The Pc Settings - Toshiba 55RZ1 Series Owner's Manual

• There is no need to use an adapter for computers
with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left
side of the screen, or parts of the picture may be
obscured depending on some signals. This is not the
malfunction.
• If the edges of the picture are stretched, readjust the
picture position adjustments in the PC Settings
menu.
• Depending on the specifi cation of the PC you are
playing the DVD-Video on, and the DVD's title, some
scenes may be skipped, or you may not be able to
pause during multi-angle scenes.
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the
TV, use an HDMI-to DVI adapter cable and analogue
audio cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analogue
audio cables are not necessary.
Left side of TV
Computer
Audio cablefor PC-to-TV connection
For acceptable PC signal format, see page 42.
Notes:
• The edges of the images may be hidden.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
Connecting your TV
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
Pin No. Signal name
1 R
2 G
3 B
4 NC (not
connected)
5 Ground
6 Ground
7 Ground
8 Ground

Using the PC Settings

• Most of the picture controls and functions are
available. However, features not available will be
greyed out or hidden.
• First press
appears on the screen, then press  or  and OK
in order to select the PC input mode (- page 36).
• This function may not be available for some signal
or if no signal is received.
• The optimum points of the Clock Phase
and Sampling Clock adjustments may be
incomprehensible according to the input signals.
Adjusting the picture position
1
From the Display Settings in the PREFERENCES
menu, press  or  to select PC Settings.
Display Settings
Auto Format
4:3 Stretch
Picture Position
PC Settings
2
Press OK to display the PC Settings menu.
PC Settings
Horizontal Position
Vertical Position
Clock Phase
Sampling Clock
Reset
Pin No. Signal name
9 NC
10 Ground
11 NC
12 NC
13 H-sync
14 V-sync
15 NC
until the video input mode list
On
Off
0
0
0
0
45