4-3. Duty Cycle And Overheating
3-1/2 Minutes Cutting
Overheating
4-4. Torch Dimensions And Weight
OM-2229 Page 12
For Units Connected to a 115 Volt Circuit
or a 230 Volt Circuit:
35% Duty Cycle At 27 amperes, 92 volts dc
35% duty cycle
0
15
Minutes
1 in
(25 mm)
1-3/8 in
(35 mm)
3.0 lb (1.4 kg)
6-1/2 Minutes Resting
8-3/8 in
(213 mm)
Duty Cycle is percentage of 10 min-
utes that unit can cut at rated load
without overheating.
If unit overheats, thermostat(s)
opens, output stops, Temperature
trouble light goes On, and cooling
fan runs. Wait fifteen minutes for
unit to cool or temperature light to
go off. Reduce amperage or duty
cycle before cutting or gouging.
Y Exceeding duty cycle can
damage
unit
and
warranty.
A
OR
Reduce Duty Cycle
sduty1 5/95 / 802 784-B
void
Ref. 802 877