Canon MG7700 Series Online Manual page 830

1304
Cause
Paper is jammed during automatic duplex printing.
What to Do
If the paper is jammed when performing automatic duplex printing, remove the paper by following these
steps.
Note
• If paper becomes jammed during printing and you need to turn off the machine to remove it, touch
the Stop button to stop the printing before you turn off the machine.
1. Detach rear cover.
Pull out the rear cover.
2. Detach transport unit cover.
Lift up the transport unit cover and pull out it.
3. Slowly pull out paper.
Note
• Do not touch the inner parts of the machine.
830