Canon MG7700 Series Online Manual page 176

Note
• If paper has print side (front or back), such as photo paper, load it with the whiter side (or glossy
side) facing down.
• Align the paper stack with the edge of the cassette 2 as shown in the figure below.
If the paper stack is in contact with the protrusion (E), the paper may not be fed properly.
• To load paper larger than A4 size in the cassette 2, press down the lock (F) on the cassette 2,
then extend the cassette 2.
5. Align the paper guide (A) in front with the paper stack.
For standard sizes, align the paper guide (A) with where it clicks into place.
6. Slide the paper guide (B) on the right to align the right and left guides with both sides of the
paper stack.
Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
176