Placing a Printable Disc
11. Tap OK.
The machine starts printing.
Note
• Touch the Stop button to cancel printing.
• After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has
dried.
• To keep the print quality at an optimal level, we recommend you stop printing discs once every ten
discs when printing more than ten discs continuously. To stop the printing operation, detach the
disc tray from the machine and close the disc tray guide. After approximately three minutes have
elapsed, open the inner cover, attach the disc tray to the machine and resume printing.
• If printing is misaligned, adjust the printing position using Adjust disc print area in Print settings
under Device settings.
Print settings
528