Canon MG7700 Series Online Manual page 710

If your security software's firewall is on, a message may appear warning you that Canon software is attempting
to access the network. If this warning message appears, set security software to always allow access.
If you are using any programs that switch between network environments, check their settings. Some programs
use a firewall by default.
If using a router, connect machine and computer to LAN side (same network
Check14
segment).
If machine is connected to an AirPort Base Station via LAN, use alphanumeric
Check15
characters for network name (SSID). (Mac OS)
If the problem is not resolved, redo setup.
• For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website.
• For Mac OS:
Follow the instructions on the Canon website.
710