Table of Contents
Advertisement
ExTERIOR
TIRE ROTATION (10,000-mile intervals)
Radial Tires
D
Radial Tires
AXLE AND RUNNING GEAR ASSEMBLY
Each Airstream RUBBER TORSION axle is aligned during manufacturing, and
double-checked on a random basis. Alignment after delivery is the customer's
responsibility.
Hitting chuck holes or rough railroad tracks while going straight will only cause
misalignment after the tire has been struck many repetitive times. Of course, a
deep enough hole can affect the alignment immediately.
The worse culprit is a curb because they are normally struck at an angle.
Surprisingly rear axles are occasionally damaged when people are attempting
to park beside a curb and are backing up their trailer.
As you look under your trailer is it normal for the axle to be bent up in the
middle. This bend is how the camber is obtained.
Toe-in is built into the axle by very slight bends in the axle tube on each end.
If tire wear ever indicate misalignment check with your dealer for the nearest
location having the proper equipment.
Axle alignment specification are listed in the specification section of this
manual.
NOTICE: Never allow heat to he applied to the axle tube since the rubber
providing the spring torsion action will be severely damaged.
D - 8
Advertisement
Table of Contents
