Table of Contents
Advertisement
SpECIFICATIONS
Axle Alignment:
Toe In
0 - 1/8" (All Models)
Camber 0 - 1 ° positive (All Models)
Tire Size
ST225/75R15 (All Models)
Tire Inflation (PSI) Cold
ST225/75RI5 LRD 65 psi
Wheel Torque
Aluminum - 110 Ft. Lbs.
Steel - 100 Ft, Lbs.
I
Hitch Ball Height
The proper height will vary according to the weight you carry and the tires you
use. However, checking the height on your trailer is relatively easy:
1. With trailer on fairly level ground measure from ground to bottom of frame,
front and rear.
2. Adjust front jack until measurements are equal
3. Now measure from ground to the inside top of ball coupler. This figure is
the hitch height. The hitch ball is then usually set 1/2" to 1" higher, according
to the spring weight of your tow vehicle, to allow for it to settle when the
trailer is hitched up.
I - 2
Advertisement
Table of Contents
