Airstream 2013 Classic Owner's Manual page 113

MONITOR PANEL
Micropulse Systems Monitor
CATCON PRODUCTS INC.
817-921-2188
techsupport@catconproducts.com
The MicroPulse System makes use of a single solid-state sensor per tank.
The MicroPulse sensor measures the static (head) pressure at the bottom of
the tank and transmits this information to the MicroPulse System Monitor.
Knowing this pressure value, after a one-time calibration has been performed,
the MicroPulse System will calculate and accurately display the tank level in
1/8 increment.
A single sensor is installed on the sidewall of each tank, near the bottom, via a
3/4" female NPT spin-in thread. The sensor is solid state, there are no moving
parts to wear or maintain. Because the principle of operation does not involve
any electrical current flow through the tanks contents (conducted or induced),
the nature of the fluid in the tank is unimportant.
The monitor system has been calibrated at the factory and should never
need another calibration. If you feel the system is not operating correctly,
please contact CATCON Products or a local Airstream dealer. The following
instructions are provided for qualified service technicians.
MICROPULSE SYSTEMS MONITOR
OPERATION INSTRUCTIONS
This example shows the monitor reporting the following:
Monitor Display
R
G
Y
G
Y LP Gas
G
G - 21
ELECTRICAL
Fresh Water
Gray Water 1
Gray Water 2
Black Water
Battery
G