Battery Charge Status; Flashlight Mode - Honeywell Voyager 1602g User Manual

Battery Charge Status

If you want the battery indicator LED to flash in a pattern that indicates the battery charge level, scan one of the following
bar codes.
Battery Charge Status On -
Short Press
The battery LED flashes in the following patterns after a short or long press of the programmable button:
Battery LED

Flashlight Mode

If you want the scanner to act as a flashlight, scan one of the bar codes below. Pressing the programmable button (short or
long press) turns the flashlight on. Pressing the scan button turns it back off.
Flashlight Mode On -
Short Press
4 - 2
LED Indicator
Orange flash
Orange, blink once
Orange, blink twice
Orange, blink three times
Green, on
Red, on
Red blink
Battery Charge Status On -
Battery Charge Status
Battery is charging
Battery is 25–49%
Battery is 50–74%
Battery is 75–99%
Battery is fully charged
Low battery 0-24%
Charging error
Flashlight Mode On -
Long Press
Long Press